Procedure For Tilting Up; Procedure For Tilting Down - Yamaha F2.5A Owner's Manual

3-37
EMU01740

PROCEDURE FOR TILTING UP

1) Tighten the air vent screw(s).
2) Place the fuel cock in the closed posi-
tion.
3) Place the gear shift lever in Neutral and
face the motor forward.
4) Hold the rear handle and tilt the engine
up fully until the tilt support lever auto-
matically turns to the locked position.
NOTE:
@
If the motor is not facing forward, the tilt sup-
port lever cannot automatically turn to the
locked position. If the tilt support lever does
not automatically turn to the locked position,
swing the motor a little to the left and right.
@
EMU00297¯

PROCEDURE FOR TILTING DOWN

1) Return the tilt support lever tilting up the
engine slightly.
2) Tilt down the engine.
GB