Maintenance - Medline ALTERRA 1385 Operation And Maintenance Manual

MAINTENANCE

CAUTION: SERVICE / MAINTENANCE PERSONNEL
The bed is a heavy piece of equipment. It is strongly recommended that any servicing or
maintenance of the bed be performed by two or more personnel.
The Maintenance Schedule on Page 21 of this manual can be copied and used as a procedural
guide and documentation.
CLEANING AND DISINFECTING THE BED
1. WARNING: Unplug the power cord before cleaning or performing maintenance on the bed.
2. Wipe the bed down with disinfectant and allow the bed to dry completely before use.
3. The bed MUST be cleaned and disinfected between patient use or cross-contamination
could occur.
MECHANICAL INSPECTION AND MAINTENANCE
1. Inspect all bed components for damage or excessive wear.
2. Visually examine all welds for cracks.
3. Inspect the deck components for any bending, damage or excessive wear.
4. Check the ends of the actuators and mounting hardware for any bending, damage or
excessive wear.
5. Inspect all bolts and fasteners for proper functioning
(Do not over tighten bolts at pivot points)
6. Check the casters to ensure they are both locking and rolling properly.
ELECTRIC INSPECTION AND MAINTENANCE
1. Inspect all electrical bed components for damage or excessive wear (i.e. broken housings or
worn components).
2. Check handset, power and actuator cords for chafing, cuts or excessive wear.
3. Ensure all plugs are fully plugged in and free of damage.
4. Ensure all cords are properly routed with cable ties and free of moving parts.
5. Check all bed functions
a. Head raises and lowers properly.
b. Foot raises and lowers properly.
c. Bed raises and lowers properly.
d. Check for malfunctions, recalls, or safety notices.
20 FCE1385B (PIC-00391) | Revision: 03/26/20
MAINTENANCE SCHEDULE – FCE1385B
Serial #
Date Inspection Maintenance Cleaning Initials Notes
1-800-MEDLINE (633-5463) | medline.com 21