Install The Hood - Broan Rangemaster 61000 Series Manual

INSTALL THE HOOD

1. Hang the hood from the brackets through
the rectangular cut-outs on the back of
the hood. Cut-outs are larger than the
brackets to allow for horizontal adjustment.
The bottom of the hood should be 24" to
30" above the cooking surface.
2. Height adjustment screws provide vertical
adjustment.
3. Depth adjustment screws provide hori-
zontal adjustment.
4. Secure the hood with mounting screws
(4,8x38mm). Use drywall anchors,
provided, if wall studs or framing are not
available.
5. Remove the tape located on the damper.
Standard Flues
HOOD DISTANCE ABOVE 36" HIGH COOK TOP
8' Ceiling
Minus 24 - 29 ¼
MOUNTING SCREWS
(4,8x38mm)
MOUNTING
SCREWS
(4,8x38mm)
MOUNTING
SCREWS
(4,8x38mm)
HEIGHT ADJUSTMENT
SCREWS
9' Ceiling
25 - plus 30"
- 6 -
RECTANGULAR
CUTOUTS
MOUNTING
BRACKETS
WALL FRAMING
DEPTH ADJUSTMENT
SCREWS
REMOVE THE TAPE
10' Ceiling
-