Summary Of Parameter Settings - Delta REG2000 Series User Manual

06 Summary of Parameter Settings

You can quickly look up the range and default for each parameter when you are setting parameter values.
You can set, change, or reset parameter values using the digital keypad (optional) or through the
communications.
NOTE
1） Means you can set the parameter during operation.
2） For complete parameter descriptions, refer to Chapter 07 Descriptions of Parameter Settings.
3） When a Power Regenerative Unit is at <STOP>, which means it is not performing energy regeneration.
00 Display Parameters
Parameter
Parameter names
codes
Power Regenerative Unit
00-00
Identity code
Power Regenerative Unit
00-01
rated current display
Setting range
0: 230 V, 7.5 kW
1: 460 V, 7.5 kW
2: 230 V, 11 kW
3: 460 V, 11 kW
4: 230 V, 15 kW
5: 460 V, 15 kW
6: 230 V, 18.5 kW
7: 460 V, 18.5 kW
8: 230 V, 22 kW
9: 460 V, 22 kW
10: 230 V, 30 kW
11: 460 V, 30 kW
12: 230 V, 37 kW
13: 460 V, 37 kW
15: 460 V, 45 kW
17: 460 V, 55 kW
0: 20 A
1: 10.5 A
2: 32 A
3: 17 A
4: 38 A
5: 20 A
6: 49 A
7: 25 A
8: 60 A
9: 32 A
10: 80 A
11: 43 A
12: 100 A
6-1
06 Summary of Parameter Settings | REG2000
Default
Read Only
Read Only