Section 9 Warranty Information; Section 10 Compliance - Thermo Scientific 88882015 Operating Manual

Section 9 Warranty
THERMO FISHER SCIENTIFIC
STANDARD PRODUCT WARRANTY
The Warranty Period starts two weeks
from the date your equipment is shipped
from our facility. This allows for shipping
time so the warranty will go into effect at
approximately the same time your
equipment is delivered. The warranty
protection extends to any subsequent
owner during the first year warranty
period.
During the first two (2) years, component
parts proven to be non-conforming in
materials or workmanship will be
repaired or replaced at Thermo's
expense, labor included. Installation and
calibration are not covered by this
warranty agreement. The Technical
Services Department must be contacted
for warranty determination and direction
prior to performance of any repairs.
Expendable items, glass, filters and
gaskets are excluded from this warranty.
Replacement or repair of components
parts or equipment under this warranty
shall not extend the warranty to either
the equipment or to the component part
beyond the original warranty period. The
Technical Services Department must
give prior approval for return of any
components or equipment. At Thermo's
option, all non-conforming parts must
be returned to Thermo Fisher Scientific
postage paid and replacement parts are
shipped FOB destination.
19 Section 9 | Warranty
THIS WARRANTY IS EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES,
WHETHER WRITTEN, ORAL OR IMPLIED.
NO WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE SHALL APPLY.
Thermo shall not be liable for any
indirect or consequential damages
including, without limitation, damages
relating to lost profits or loss of
products.
Your local Thermo Sales Office is ready
to help with comprehensive site
preparation information before your
equipment arrives. Printed instruction
manuals carefully detail equipment
installation, operation and preventive
maintenance.
If equipment service is required, please
call your Technical Services Department
at 1-866-984-3766, option number 2.
We're ready to answer your questions on
equipment warranty, operation,
maintenance, service and special
application. Outside the USA, please
contact local Thermo Technical Services
Department or local distributor for
warranty information.

Section 10 Compliance

1. European Union
The European voltage models
of this product meet all the
applicable requirements of the European
Directives and therefore display the CE
Marking. These Directives are captured
in the EU Declaration of Conformity
which may be obtained from the
manufacturer.
2. Product Safety
This product family has been tested to
applicable productsafety standards by a
Nationally Recognized Test Laboratory
(NRTL) and may bear the NRTL's mark of
safety compliance to those applicable
standards.
3. Electromagnetic Compatibility
3.1 FCC Statement (USA)
Any changes or modifications
not expressly approved by the
party responsible for compliance could
void the user's authority to operate the
equipment.
Note: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with
the instruction manual, may cause
harmful interference to radio
communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which
case the user will be required to correct
the interference at his own expense.
3.2 Canadian ISED IC Notice
This ISM digital apparatus complies with
Canadian ICES-001.
Cetappareil ISM estconformeá la norme
NMB-001 du Canada.owing optimum
tray rotation.
3.3 Korean KC Registration
사용자안내문
이기기는엄무용환경에서사용할
목적으로적함성평가를받은기기
로서가정용환경에서사용하는경우전파
간섬의우려가있습니다
WARNING Statement: EMC Registration
is done on this equipment for business
use only. It may cause interference when
the product would be used in home. This
warning statement applies a product for
business use.
4. Environmental Compliance
4.1 Evaluation of Chemicals -
Regulations and Directives
4.1.1 REACH - Europe
Thermo Fisher Scientific is
committed to meeting all
compliance obligations to evaluate,
communicate, and register any
Substances of Very High Concern
(SVHC), and finding alternates where
Digital Cel-Gro Tissue Culture Rotator 20