Siemens Sinamics S120 Manual page 9

The following directives and standards are relevant for SINAMICS S devices:
● European Low Voltage Directive
SINAMICS S devices fulfil the requirements stipulated in the Low-Voltage Directive
2014/35/EU, insofar as they are covered by the application area of this directive.
● European Machinery Directive
SINAMICS S devices fulfil the requirements stipulated in the Low-Voltage Directive
2006/42/EU, insofar as they are covered by the application area of this directive.
However, the use of the SINAMICS S devices in a typical machine application has been
fully assessed for compliance with the main regulations in this directive concerning health
and safety.
● European EMC Directive
SINAMICS S devices comply with the EMC Directive 2014/30/EU.
● EMC requirements for South Korea
SINAMICS S devices with the KC marking on the rating plate satisfy the EMC
requirements for South Korea.
● Eurasian conformity
SINAMICS S comply with the requirements of the Russia/Belarus/Kazakhstan customs
union (EAC).
● North American market
SINAMICS S devices provided with one of the test symbols displayed fulfil the
requirements stipulated for the North American market as a component of drive
applications.
You can find the relevant certificates on the Internet pages of the certifier
(http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.html).
● Specification for semiconductor process equipment voltage drop immunity
SINAMICS S devices meet the requirements of standard SEMI F47-0706.
● Australia and New Zealand (RCM formerly C-Tick)
SINAMICS S devices showing the test symbols fulfil the EMC requirements for Australia
and New Zealand.
● Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO
9001 and ISO 14001.
Not relevant standards
China Compulsory Certification
SINAMICS S devices do not fall in the area of validity of the China Compulsory Certification
(CCC).
Power Units in Booksize C/D-Type Format
Manual, 01/2017, 6SL3097-4AC20-0BP1
Preface
9