Toshiba MD-0101 Service Manual page 22

11. Detach the E-ring, and remove clutch 08S018-
06CL and bushing.
12. Detach stop ring, and remove bushing and ADU
feed roller shaft upper.
[H] ADU feed roller shaft middle
1. Detach ADU hinge cover F. (See Fig. 6-1)
2. Detach ADU hinge cover R. (See Fig. 6-2)
3. Remove ADU paper guide assembly.
(See Fig. 6-3 and 6-4)
4. Remove ADU. (See Fig. 6-5 to 6-9)
5. Detach ADU cover. (See Fig. 6-10 to 6-12)
6. Detach PWA cover. (See Fig. 6-13)
7. Remove ADU PWA. (See Fig. 6-14)
8. Detach stop ring and remove pulley and timing
belt.
Note: Be sure to insert the pins when attaching.
MD-0101 DISASSEMBLY AND REPLACEMENT
E-ring
Clutch 08S018-06CL
Pulley
Pin
6 - 6
Bushing
Fig. 6-19
ADU feed roller
shaft upper
Bushing
Stop ring
Fig. 6-20
Pin
Stop ring
Timing belt
Pulley
Stop ring
Fig. 6-21
October 2000 © TOSHIBA TEC
239
240
Pulley
241