Advertisement
Step 7
You will need
4 x Corner
48 x Screws
Fitting (H8)
(H9)
8 x Plastic
Hammer
Glides (H11)
Phillips Head
Screwdriver
Attach 4 x Corner Fitting (H8) to the dinning table with 48 x Screws (H9) as shown.
Tighten Screws using a Phillips head screwdriver.
Hammer 8 x Plastic Glides (H11) into end of each leg (P2, P3)
Step 8
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au
H9
Job Complete!
H9
H9
Page 8
Advertisement
