Page 2
Sicherheitshinweise Warnung! Niemals absichtlich den Lichtstrahl in die eigenen oder in die Augen anderer Personen richten. Falls ein Lichtstrahl in die Augen trifft, sind die Augen bewusst zu schließen und der Kopf aus dem Lichtstrahl zu bewegen. Es dürfen keine optisch stark bündelnden Instrumente zur Betrachtung des Lichtstrahls verwendet werden.
Montage Montage Montage des Schnellspanners: Akkutypen: Sowohl zwischen Lampenkopf und Halter, Der im Lieferumfang enthaltene Akku verfügt als auch zwischen Halter und Schraube auf seiner Rückseite über eine Lasche und wird muss je ein O-Ring platziert werden. mit einem Klettband befestigt. Darüber hinaus verfügt er über eine Kapazitätsanzeige.
Bedienung Lampe Bedienung Lampe Einschalten: Einstellungen über den Taster der Fernbedienung: Durch Verbinden des Akkus mit dem Lampenkopf schaltet sich die Lampe automatisch an. Nach dem Einschalten Den kleinen Taster der Fernbedienung so lange gedrückt halten (loslassen zur Auswahl) bis die Lampe leuchtet die Lampe, je nach Umgebungslicht, im Tagfahr-modus oder im Abblendlicht.
Page 5
Bluetooth Funksender Bedienung Smartcore Akku Der Bluetooth Funksender wird zusammen mit dem passenden Peppi V5 Lenker- Kapazitätsanzeige halter geliefert. Der ideale Befestigungsort des Funksenders ist gleich neben dem Griff, damit musst du die Hand nicht vom Lenker nehmen. Peppi V5 auch für 32mm Akustisch: = 100 % erhältlich, Artikel Nummer: d1086...
überprüfen Garantieanpruch verloren geht. Bevor sie einen Fehler selbst beheben nehmen sie Kontakt mit unserem Service auf. Power LEDs leuchten nicht. LED-Einsatz ist defekt Austauschen bzw. Lupine kontaktieren Akku: Vor längerem Nichtgebrauch laden Sie den Akku voll und lagern Sie diesen an einem möglichst kühlen, Die Leuchtzeiten sind zu gering.
Safety instructions Warning! Avoid looking directly into the light emitted by the light or shining the light into your own eyes or the eyes of another person. If the light accidentally shines into your eyes, close your eyes and move your head out of the light beam.
Assembly Instructions Battery mounting Assemble the quickrelease to the lamphead: Battery type: Position one o-ring between lamphead The battery is mounted with a velcro as shown here. and quickrelease, and one o-ring between They also come with a capacity indictaor. quickrelease and screw.
Operation Turn on: Customizing the settings at the lamphead: The lamp will turn on automatically after connecting it with the battery. Depending on the ambient light, it starts Keep the small button pressed (let go to select) until the lamp lights up as many times you‘ll need it to. lighting either with low beam or daytime running light.
Operation Smartcore battery Bluetooth remote control The Bluetooth Remote comes together with the Peppi V5 barmount. On the bike, the best way to mount the remote is directly next to your grips so you have full control and don't need to take off your hands while riding. Peppi V5 Capacity indicator also available for 32mm, Art.
A leakage in consequence of opening the light is excluded from warranty! Before you try to repair the power LEDs do not come Get in touch with Lupine something on your own get in touch with our helpful Service Team. on, but the PCS LEDs flash.
SL AF Nano with 5.0Ah battery: 250 g More informations at www.lupine.de Battery capacity/nominal voltage: Approval: Protection class: EC Declaration of Conformity: www.lupine.de/ce/ StVZO IP68 3.5 Ah / 7.2 V Li-Ion K1797 5.0 Ah / 7.2 V Li-Ion Charger Wiesel:...
Declaration of confirmity Declaration of confirmity Canada: Regulations: This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). The laws governing the allowable application domain for this lighting system may vary from one Operation is subject to the following two conditions: country to another.
Need help?
Do you have a question about the SL Nano and is the answer not in the manual?
Questions and answers