Sicherheitshinweise Inhaltsverzeichnis / Index Warnung! Niemals absichtlich den Lichtstrahl in die eigenen oder in die Augen anderer Personen richten. Deutsch Falls ein Lichtstrahl in die Augen trifft, sind die Augen bewusst zu schließen und der Kopf aus dem Erst lesen, dann leuchten! Lichtstrahl zu bewegen.
Montage Akkus Montageanleitung Akkutypen: Der im Lieferumfang enthaltene Akku verfügt auf seiner Rückseite über eine Lasche und wird mit einem Klett- band befestigt. Darüber hinaus verfügt er über eine Kapazitätsanzeige. 6.9Ah 3.5Ah Akkumontage: Je nach Rohrumfang ist zur Montage entweder das kurze oder das lange Klettband geeignet. Das Klettband Für eine mittige Montage bei 50mm Vorbauten ist das Vorbau Kit (Art.
Bedienung Lampe Bedienung Lampe Individuelle Einstellungen über den Taster des Lampenkopfes: Initialisierung: Verfügbare Einstellungen Taster gedrückt Erklärung halten Nach dem Anstecken des Scheinwerfers an den Akku durchläuft die Software einen Selbsttest. (loslassen zur Auswahl) Der Scheinwerfer, sowie der SL Schriftzug an der Rückseite des Lampenkopfes leuchten einmal kurz auf. SL AF aufleuchtet Das sensorgesteuerte Umschalten von Abblendlicht auf Verzögerung (3 Sek./16 Sek.)
Bedienung Smartcore Akku Anzeigen der Lampe Kapazitätsanzeige am Lampenkopf: Akustisch: Lampe leuchtet mit Fernlicht. = 100 % Blauer SL Schriftzug am Zum Ablesen der Kapazität genügt ein kurzer Druck auf das Tastfeld. Zunächst erfolgt = 80% Lampenkopf leuchtet blau = 60% ein akustisches Signal, welches eine schnelle, in 20% Stufen genaue Überprüfung der = 40% Restkapazität ermöglicht.
Bluetooth Funksender Bluetooth Funksender Werkseinstellung: Alternativprogramm: Der Bluetooth Funksender wird zusammen mit dem passenden Peppi V5 Lenkerhalter geliefert. Beim Biken ist der ideale Befestigungsort des Funksenders gleich neben dem Griff, damit hast du die volle Kontrolle und Großer Taster: Ein- und Ausschalten Großer Taster: Ein- und Ausschalten musst die Hand nicht vom Lenker nehmen.
Service auf. Power LEDs leuchten nicht. LED-Einsatz ist defekt Austauschen bzw. Lupine kontaktieren Akku: Vor längerem Nichtgebrauch laden Sie den Akku voll und lagern Sie diesen an einem möglichst kühlen, trockenen Ort, wie z.B. Keller etc. Die Leuchtzeiten sind zu gering.
SL AF 7: 5:30 Stunden SL AF 4 komplett mit Akku: 250 g SL AF 7 komplett mit Akku: 360 g Mehr Informationen unter www.lupine.de Akku-Kapazität/Nennspannung: Schutzklasse: EG Konformitätserklärung: www.lupine.de/ce/ SL AF 4: 3.5 Ah / 7.2 V Li-Ion IP68 SL AF 7: 6.9 Ah / 7.2 V Li-Ion...
Letzte Hinweise Safety instructions Warning! Regelungen: Avoid looking directly into the light emitted by the light or shining the light into your own eyes or the eyes of another person. If the light accidentally shines into your eyes, close your eyes and move Die Verwendung dieses Beleuchtungssystems für bestimmte Zwecke kann in Europa von Land zu your head out of the light beam.
Assembly Instructions Battery mounting Battery type: The battery is mounted with a velcro as shown here. They also come with a capacity indictaor. 6.9Ah 3.5Ah Battery mounting: Your battery is supplied with a velcro strap, coated with an anti-slip material to ensure a secure mount. Use the strap which most closely matches your tube size.
Operation Operation Customizing the settings at the lamphead: Initialization: Keep the button After connecting the lamp to the battery, the software runs a selftest; the lamp itself as well as the blue „SL“ on pressed (let go to Explanation Available settings the back of the lamp light up once.
Operation Smartcore battery Lamphead informations Capacity indicator At the lamphead: High beam is activated. Audible: SL on the back of the lamp = 100 % lights up blue To check the capacity, simply press the touch-pad once. At first an audible signal will = 80% = 60% sound to give a quick reading in 20% steps.
Bluetooth remote control Bluetooth remote control The Bluetooth Remote comes together with the Peppi V5 barmount. On the bike, the best way to mount Factory setting: Alternative mode: the remote is directly next to your grips so you have full control and don't need to take off your hands while riding.
A leakage in consequence of opening the light is excluded from warranty! Before you try to repair the power LEDs do not come Get in touch with Lupine something on your own get in touch with our helpful Service Team. on, but the PCS LEDs flash.
SL AF 7 with battery: 360 g More informations at www.lupine.de Battery capacity/nominal voltage: Protection class: EC Declaration of Conformity: www.lupine.de/ce/ SL AF 4: 3.5 Ah / 7.2 V Li-Ion IP68 SL AF 7: 6.9 Ah / 7.2 V Li-Ion...
Miscellaneous Declaration of confirmity Declaration of confirmity Canada: Regulations: This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). The laws governing the allowable application domain for this lighting system may vary from one Operation is subject to the following two conditions: country to another.
Need help?
Do you have a question about the SL AF Series and is the answer not in the manual?
Questions and answers