Power Button With Finger Print Reader (Optional) - Dell Latitude 9510 Service Manual

Steps
1. Align and place the power button assembly on the system. Adhere the power button assembly on the palm rest.
2. Install the power button bracket on the system.
3. Install the three M1.5x2.5 screws securing the fingerprint reader bracket.
Next steps
1. Install the I/O board.
2. Install the Fan.
3. Install the Base cover.
4. Install the SIM card tray.
5. Install the microSD card.
6. Follow the procedure in

Power button with finger print reader (optional)

Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the SIM card
4. Enter service mode.
5. Remove the Base cover.
6. Remove the system fan.
7. Remove the I/O board
About this task
The following images indicate the location of the fingerprint reader and provide a visual representation of the removal
procedure.
34 Removing and Installing Components
After working on your computer
before working inside your
card.
tray.
.
.
computer.