Dell Latitude 9510 Service Manual page 53

4. Remove the Base cover.
5. Remove the Solid-state
6. Remove the Speakers.
7. Remove the Battery.
8. Remove the Display assembly.
9. Remove the Fan.
10. Remove the I/O board
11. Remove the System board.
About this task
The following images indicate the location of the keyboard and provide a visual representation of the removal procedure.
Steps
1. Peel back the antenna cable, WWAN Darwin cable, touchpad FPC, LED FFC from the keyboard.
2. Disconnect the backlight cable and the keyboard cable from the connectors on the touchpad.
3. Remove the four M1.6x2 and thirty-six M1.6x1.5 screws that secures the keyboard to the palmrest.
4. Lift the keyboard from the palmrest.
drive.
.
Removing and Installing Components 53