Dell Latitude 9510 Service Manual page 28

Installing the system fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system fan and provides a visual representation of the installation procedure.
Steps
1. Align and place the system fan onto the palmrest assembly.
2. Replace the two (M2x3) screws that secure the system fan in place.
3. Connect the system fan cable and adhere the adhesive tape to secure the system fan cable.
4. Route the antenna cable through the routing guide, and connect the I/O cable.
NOTE: Reconnect the battery after system repair.
Next steps
1. Install the Speakers.
2. Install the Base cover.
3. Install the SIM card tray.
4. Install the microSD card.
5. Follow the procedure in
28 Removing and Installing Components
After working on your computer.