Power Button With Finger Print Reader (Optional); Removing The Power Button With Fingerprint Reader - Dell Latitude 9520 Series Service Manual

Steps
1. Align and place the power button assembly on the system. Adhere the power button assembly on the palmrest.
2. Place the power button bracket on the power button assemby and install the three (M1.5x2.5) screws.
3. Fold back the display hinge and install the three (M2.5x5) screws to secure it.
Next steps
1. Install the I/O daughter
2. Install the system fan.
3. Install the base cover.
4. Install the SIM card tray.
5. Install the microSD card.
6. Follow the procedure in

Power button with finger print reader (optional)

Removing the power button with fingerprint reader

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the SIM card
4. Enter service mode.
5. Remove the base cover.
6. Remove the system fan.
7. Remove the I/O daughter
About this task
The following images indicate the location of the fingerprint reader and provide a visual representation of the removal
procedure.
board.
After working on your computer
before working inside your
card.
tray.
board.
.
computer.
Removing and installing components 35