Renault KWID Owner's Manual page 83

changing a Wheel (2/2)
refitting the carwheel
-by aligning one of holes to the stud in
the wheel drum/disc
Keep the wheel cover (on select
variants) and wheel bolts handy, place
and hold the wheel cover to align with
the stud and fasten the 2 wheel bolts in
the remaining locations.
Ensure the wheel is fastened sufficient
enough, so that removing stud will not
cause the wheel to come out off the
drum/disc.
Replace the stud by bolt and put the
stud back in spare wheel lock screw
cap by gently pressing it in the groove.
Using the wrench, tighten the bolts
evenly. Uncrank (release) the jack using
wheel wrench till the jack becomes free
from holding the vehicle anymore.
Now tighten fully the wheel bolts.
Place the punctured or removed wheel
in spare wheel storage area and lock it
by provided lock screw.
Place the wheel wrench and jack in
pouch.
If the vehicle is parked on
the hard shoulder, you must
warn other road users of
your vehicle's presence
with a warning triangle or with other
devices as per the legislation apply-
ing to the country you are in.
If you have a puncture, re-
place the wheel as soon
as possible.A tyre which
has been punctured should
always be inspected (and repaired,
where possible) by a specialist."
5.5