Renault KWID Owner's Manual page 57

HEATING, VENTILATION, AIR CONDITIONING
Switching passenger
compartment isolation mode/
air recirculation mode on.
â
Bring lever 5 to position
Under these conditions, air is taken
from the passenger compartment and
is recirculated, with no air being taken
from outside the vehicle.
Air recirculation is used to:
– to isolate the passenger compartment
from the external atmosphere
– to bring the passenger compartment
.
to the desired temperature as quickly
as possible.
(2/2)
Rapid demisting
Turn controls 1, 3 and 4 to positions
W
– Turn control 1 on full hot position
– Turn control 3 on max speed position 4
– Turn control 4 to full defrost mode.
– move slider knob 5 to fresh air mode.
Using the climate control increases the
speed of demisting.
Information and advice on use: refer
to information on "Air conditioning:
information and advice on use".
Prolonged use of air recirculation
can lead to condensation forming
on the windscreen, and discomfort
due to the use of non-renewed air in
the passenger compartment.
You are therefore advised to pick-up
external air as soon as the air
recirculation function is no longer
required, by sliding control 5 to the
right.
:
3.5