Renault KWID Owner's Manual page 43

GEAR LEVER, HAND bRAkE (1/2)
Selecting reverse gear
(vehicle in stationary condition)
Vehicles with manual gearbox: refer
to the grid on the gear lever knob 1.
Pull the release knob in upward di-
rection and then engage the reverse
gear.
Gear change indicators
Depending on the vehicle, to obtain op-
timum consumption levels, an indicator
light on the instrument panel lets you
know the best time to move up or down
a gear.
Depending on the gradient
and/or vehicle load, it may
be necessary when statio-
nary to apply the brake by
at least a further two notches and
engage a gear (1 or reverse gear).
st
An impact to the under-
side of the vehicle while
manoeuvring (e.g.: stri-
king a post, raised kerb or
other street furniture) may result in
damage to the vehicle (e.g.: defor-
mation of an axle).To prevent any
risk of accident, have your vehicle
checked by an approved dealer.
2.5