Cleaning The Knife; Reassembly - Berkel 829A Owner's/Operator's Manual

C K
LEANING THE
1. Switch slicer off and unplug the power cord.
2. Make sure thickness control knob is fully to the right, so the gauge plate covers the knife.
3. Clean front of knife, moving from the center outward.
4. Clean back of knife. Repeat cleaning both front and back of knife with clear water.
Always move from the center outward. NEVER MOVE YOUR HAND TOWARDS
THE EDGE OF THE KNIFE. Sanitize and allow to dry.
5. Clean slicer base. Use a cloth and cleaning solution. Rinse with hot water. Sanitize and let
air dry.
R
EASSEMBLY
1. Place center plate over the knife.
2. Place a drop of Berkel Food Machine Oil on the threads of the center plate knob.
3. Insert center plate locking knob and tighten. Make snug but DO NOT overtighten.
4. Replace slice deflector.
5. Replace product table. Hold the product table with both hands and set it carefully in place.
REMEMBER that the pusher is loose and can slide.
6. Tighten the product table locking knob. Now the product table can be moved.
7. For the 839A put several drops of Berkel Food Machine Oil in the oil port on the pusher
and move the pusher back and forth to distribute the oil. For the 829A put several drops of
Berkel Food Machine Oil on the round rail and move the pusher back and forth to distrib-
ute the oil.
8. Put several drops of Berkel Food Machine Oil in the round rail oil port on the front of the
slicer.
9. Check the guards. Make sure slice deflector, sharpener and center plate knife guard are in
place and clear of the knife. Also, make sure that the product table moves back and forth
easily.
10. Plug in the power cord.
NIFE
829A &839A O /O
WNER
M • 9
PERATOR ANUAL