Berkel 839A Specifications

Model 839A
Safety and Convenience Features
Berkel Model 839A automatic gravity feed slicer
features Berkel's hollow ground chromium-plated,
carbon steel knife and built-in, single lever, dual-
action sharpener with convenient handle located on
the sharpener cover. The permanent, tapered guard
covers the non-slicing portion of the knife even when
the center plate is removed. The 45 table with gauge
plate interlock and front mounted, articulating pusher
and fence make product feed easier, creating more
consistent and uniform slices with less waste. The
single-speed carriage operates at 52 slices per minute.
The 1/2 HP motor, 14" knife and large product table
are ideal for handling oversize meats, cheeses and a
variety of other products. The 839A slicer is easy to
clean and disassembles quickly without tools.
Approved By:
Date
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form #SPC04-0902N
Item #
Model 839A
Automatic Gravity Feed Slicer
Standard Features
Separate 1-speed, 1/2 HP, totally enclosed
and permanently lubricated motors for the knife
and carriage
Furnished in 115/60/1, 5.8 amp, AC, ETL listed
Carriage speed is 52 slices per minute
Finish is stainless steel and sanitary anodized
aluminum; unit disassembles quickly without tools
for easy cleaning
45 Product table with gauge plate interlock. Front
mounted, articulating pusher and fence
Nominal 14" (350 mm) diameter; hollow ground,
hardened and polished forged chromium-plated
carbon steel knife
Carriage handles food up to 11" (280 mm) wide, by
8-1/2" (216 mm) high or 8-1/2" (216 mm) diameter
Precise slice adjustment to a thickness
of 3/4" (19 mm)
Built-in, non-removable, top-mounted, two
stone knife sharpener with single lever, dual-
action system
Permanent, tapered knife ring guard covers non-
slicing portion of knife even when the center plate
is removed; ring guard design provides more room
behind the knife for easy cleaning
No-Volt release prevents activation of the slicer in
the event of a power interruption; operator must
restart the slicer
Positive, moisture protected, on/off switches and
power indicator light
Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle