Page 1
ASSEMBLY INSTRUCTIONS RiverRidge ® Ellsworth Two Door Wall Cabinet ITEM#: 06-023 White ITEM#: 06-024 Espresso ITEM#: 06-128 Taupe ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury.
Page 2
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 50 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 50 POUNDS TOTAL WEIGHT. OVERLOADING WITH MORE THAN 25 POUNDS PER SHELF OR 50 POUNDS TOTAL WEIGHT MAY CAUSE THE SHELF TO FALL FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST DESCRIPTION Top Board Left Side Panel Right Side Panel Right Door Left Door Rear Top Cross Bar Towel Bar Shelf Bottom Board Lower Back Board Top Back Board Middle Back Board...
Page 4
PARTS LIST PARTS DESCRIPTION 10PCS Cam Bolt 10PCS Cam Lock 18PCS Wood Dowel 4PCS Metal Hinge Magnet 2PCS Magnet Plate 2PCS Knob 2PCS Machine Screw (4x18mm) 18PCS Wood Screw (3x10mm) 2PCS Screw (3x14mm) 24PCS Back Board Screw (2.5x12mm) 2PCS Long Screw (4x45mm) 2PCS Plastic Anchor Wall Mounting Paper Template...
Page 5
STEP 1 Screw 4 cam bolts (A) into cam bolt holes on top board (1). Insert 2 wood dowels (C) into dowel holes on top board (1). Attach magnet (E) to top board by inserting 2 screws (K) through holes on magnet (E) and tighten to top board (1).
Page 6
STEP 3 Screw 3 cam bolts (A) into cam bolt holes on right side panel (3). Insert 7 wood dowels (C) into dowel holes on right side panel (3). Attach 2 metal hinges (D) to right side panel (3) by inserting 4 wood screws (J) through holes on metal hinges (D) and tighten to right side panel (3).
Page 7
STEP 5 1. Insert 2 wood dowels (C) into dowel holes on lower back board (10). STEP 6 1. Attach lower back board (10) to bottom board (9) by inserting 2 wood dowels (C) into wood dowel holes on bottom board (9).
Page 8
STEP 7 1. Attach rear top cross bar (6), shelf (8), bottom board (9) and lower back board (10) to left side panel (2) by inserting cam bolts (A) into cam lock holes and inserting wood dowels (C) into dowel holes on rear top cross bar (6), shelf (8), bottom board (9) and lower back board (10).
Page 9
STEP 9 1. Attach top board (1) to assembled unit by inserting wood dowels (C) into dowel holes and inserting cam bolts (A) into cam lock holes on left and right side panel (2) and (3). 2. Insert 4 cam locks (B) into cam lock holes on left and right side panel (2) and (3) and rotate cam locks (B) clockwise to secure cam bolts (A).
Page 10
STEP 11 1. Attach left door (5) to left side panel (2) by inserting 4 screws (J) through holes on hinge (D) and tighten to left door (5). 2. Repeat above step to assemble right door (4). STEP 12 Option #1: Securing to Drywall Using wall mounting paper template to determine position, screw 2 plastic anchors (O) into drywall.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth.
Page 12
Thank you for purchasing this RiverRidge Home item. We hope you ® enjoy it and consider purchasing other RiverRidge items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
Need help?
Do you have a question about the 06-023 and is the answer not in the manual?
Questions and answers