Advertisement
31833208.fm Page 10 Tuesday, July 18, 2006 10:40 AM
1
3
2
1. Control panel.
Light
:
move the switch to the right or press the button to switch
on.
Extraction speed
:
Move the switch to the right or press the next button to
increase extraction speed (or open the electric shutter)
2. Grease filters
3. Lamp covers (or halogen lamps, depending on the
model).
4. Telescopic flue.
Grease filters:
Metal grease filters have an unlimited
life and should be washed once a
month either by hand or in a
dishwasher at a low temperature and
with a short cycle. Washing in a
dishwasher can cause grease filters to
turn white, but this in no way affects
efficiency.
Press the handle to release the filter
Wash the filter and leave it to dry, proceeding in reverse
order to refit it.
Bulb/s:
Detach the lighting unit and remove
the burnt-out bulb.
Refit the filters.
Halogen lamps.
Use a small screwdriver or other
suitable tool to prise off the cover.
Snap-fit the cover back on.
Use only max 40W
E14 bulbs or max 20 W halogen
bulbs (depending on the model),
taking care not to touch them with
your hands.
5019 318 33208
4
.
a
b
D
GB
F
NL
Fitting or replacing the carbon filter
(filter hoods only).
Change the carbon filter every six months.
1. Remove the grease filters.
2. Fit the filters as shown in the figures below.
3. Reverse the above procedure to remove the carbon
filter.
4. Refit the grease filters.
1.
2.
CLACK!
P
I
GR
E
1.
Advertisement
