INSTALLATION GUIDE Read all installations before installing this appliance IMPORTANT SAFETY NOTICE WARNING...
The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. Do not attempt to install this appliance yourself. Injury could result from installing the unit due to lack of appropriate electrical and technical background.
By ensuring this product is disposed correctly, you will help prevent negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The symbol on the product indicates that this product may not be treated as household waste.
Connection to power Make sure that the voltage of power network match with the one that is written on the type board of the absorber plate. The connection to power must be handled by an authorized technician. The power cord must include a bipolar switch with contact separation distance over or equal to 3mm.
Filter cleaning or replacement In order to replace or clean the filter you have to: 1. Remove the aluminum filter by pressing the filter buttons. Now you are able to change or clean the filter. The aluminum filter should be washed by dishwasher or by hands every 30 days.
Lamp replacement During lamp replacement procedure, the hood must be off. The replacement of the lamps is made if you open the aluminum filter by moving the filter buttons as the arrows shows on Fig.6. Then remove the plastic covers of the lamps carefully according to the picture below.
Attention In the below cases the hoods will be very dangerous: - Do not disassemble the grease filter when the hood is working. - Do not touch the lamps or surfaces surrounding after the hoods have been working a long time. - Do not leave bare flames under the range hood, it may damage the filter or cause a fire.