Commissioning The Record Service Display - Record R62 User Manual

2.2

Commissioning the record Service Display

Before using the record Service Display, it has to be configured in order to communicate with the PLC
(Programmable Logic Control).
Accessing the "SETUP" menu on the screen:
Connect the plug while keeping the rotary dial pressed.
Setting the communication speed:
Selecting the communication mode:
BAL_SD_R62_EN_2V2_BLA_121-006454377
Operating modes
Scroll down to "Set Baudate" and confirm
Set to "9600" and confirm
Return to the previous menu
Select "Set Serial Mode" and confirm
Select "RS485 FTP" and confirm
2
6/ 17