1
Instructions
1.1
Connecting the Service Display
Connect the Service Display to one of the sockets in the door or in the optional socket on the inside
column (secure side).
1.2
Connection to the column on the entrance door entrance side
BAL_SD_R62_EN_2V2_BLA_121-006454377
IMPORTANT
Please ensure that the "ON / OFF" switch is in the OFF position before connect-
ing and/or disconnecting the Service Display.
CAUTION
If the display is on (switch in the ON position) while being connected / discon-
nected
• this can lead to destruction of the control interface
Place switch in the OFF position
Remove the protective cap and plug the Service
Display into the 9-pin socket (see picture).
Instructions
4/ 17
1