4.2.
Error display and troubleshooting
In case of an anomaly in the operator system, the standard screen of the BDE-D automatically
shifts from operating mode to error display.
After 2 seconds, display changes between normal / inverse.
If several errors are active, they are numbered:
For instance, error 1/2 means that the first one of 2 errors is displayed.
Browsing through error displays:
4.2.1.
Common error displays
The possible error messages are listed in the table below according to their number and together
with a problem description and data for troubleshooting the errors and resetting the display. The
following abbreviations and symbols are used:
Abbreviation/
Symbol
Nr.
Typ
Res
W
record sliding door system 20
Temporary return to main display for 4 seconds after browsing through error
displays.
Meaning
Status or error number.
This error only occurs with this special type of door.
A service technician is required for resetting the error display. After removing an
error, no automatic reset happens.
If a „W" is displayed after the status or error number, it means that the error on
display is a warning message and not an error message.
Despite the upcoming error the door can provisionally be locked as follows:
Set BDE-D on MANUAL operating mode
•
Slide door leaves by hand into closed position
•
Set BDE-D on LOCKED operating mode
•
Door remains closed and locked
•
Article no. 102-020.110.805
4
Repairs
page 8