Table of Contents
Advertisement
Reset control panel
Step
Button
Operation
1.
Press button for 12 seconds
E
2.
3.
5.1.3
Display system information
Information about the door system, such as software version, door type, or servicing status, can be
shown on the display.
NOTICE
The main view is returned to by scrolling or automatically after 20 seconds.
Step
Button
1.
E
2.
E
3.
E
5.2
Parameter overview
Factory settings: Basic operator (Full Power)
NOTICE
Parameterization of the swing door operator can only be carried out with the optional elec-
tronic BDE-D, the App i-record or the service and flash programmer FPC 902 or the test box.
NOTICE
Please always leave the parameter list in the drive even when replacing the STG!
BAL_C127-SU_OFFSET_EN_1V0_REC_121-006454770
Operation
Press button for approx.
2 seconds
Press button 1 x
Press button 1 x
Function
Perform control panel reset
The connection has been established
Function
Software information
is displayed
Scroll through the in-
formation and/or re-
turn to main view
Scroll through the in-
formation and/or re-
turn to main view
Operation
Display on LCD
DFA 127 V2.21
Basic operator
Software
STA20 V2.0
BDE-D V2.05 1
Software
STA20 V2.0
BDE-D V2.05 1
Servicing
0
50
100
5
21 / 32
Advertisement
Table of Contents
