Wilo Control DigiCon Installation And Operating Instructions Manual page 29

4 Intended use
Wilo-Control DigiCon
The DigiCon interface converter is used for
the universal connection of pumps with
communication facility with PLR interface
to the customer's control and monitoring
units with RS 485 digital serial interface.
64 wholly digital interface converters can
be connected to an RS 485 serial interface.
Pumps that can be connected:
• 4 pumps (single or double)
Tab. 1
Pumps that can be connected
Glandless pumps
• Wilo-TOP-E with IF-Module PLR
• Wilo-TOP-ED with 2x IF-Module PLR
• Wilo-Stratos with IF-Module Stratos PLR
• Wilo-Stratos-D with 2x IF-Module Stratos PLR
• Wilo-Stratos-Z with IF-Module Stratos PLR
Glanded pump
• Wilo-VeroLine-IP-E with IF-Module PLR
• Wilo-VeroTwin-DP-E with IF-Module PLR
• Wilo-CronoLine-IL-E with IF-Module PLR
• Wilo-CronoTwin-DL-E with 2x IF-Module PLR
Tab. 2
5 Product information
5. 1 Type code
Example: Wilo-Control DigiCon
Control
DigiCon
Installation and operating instructions Wilo-Control DigiCon/DigiCon-A
Model reference
Type reference:
Wilo-Control DigiCon-A
The DigiCon-A extension with additional
manual operation level allows the higher-
ranking control of pumps that are con-
nected to DigiCon and DigiCon-Modbus
interface converters.
Pumps that can be activated:
• 2 pumps (single or double)
DigiCon
DigiCon-A
English
23