Download Print this page

Oblica ORTAL 75x65 Specifications & Product Manual

Single sided fireplaces

Advertisement

Quick Links

ORTAL
SINGLE SIDED FIREPLACES:
SPECIFICATIONS & PRODUCT GUIDE

Advertisement

loading

Summary of Contents for Oblica ORTAL 75x65

  • Page 1 ORTAL SINGLE SIDED FIREPLACES: SPECIFICATIONS & PRODUCT GUIDE...
  • Page 2 • Always used a licensed gas fitter / plumber to install the appliance IMPORTANT: THIS IS NOT AN INSTALLATION MANUAL. PLEASE REFER TO THE DETAILED INSTALLATION MANUAL DELIVERED WITH THE APPLIANCE. OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 2...
  • Page 3: Specifications

    1.13kPA 0.50kPA 0.22kPA 125/205mm 7x1.05mm orifice Marked 1400: with single 3.8mm orifice 250 / 250H B160 Marked 800: with 52MJ/h 1.13kPA 0.50kPA 0.22kPA 125/205mm 7x1.05mm orifice Marked 1400: with single 3.8mm orific OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 3...
  • Page 4 Note: Minimum height off of the floor for all front facing Ortal fireplaces is 210mm. Appliance legs must not be removed. TRAD 90 and TRAD 110 are supplied without legs andshould be installed on 16mm Villaboard when installed on a combustable floor. OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 4...
  • Page 5 2210 200H 2210 proof sealant. We recommend the fireplace to be in position and 2683 flued prior to cladding. 250H 2683 TR90 1170 TR110 1360 1059 OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 5...
  • Page 6 250H 2683 We recommend using 16mm Gypsum fire rated plasterboard or its TR90 1170 equivalent for the enclosure of the fireplace chase. TR110 1360 1059 OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 6...
  • Page 7 Heat release vent MODEL (min surface) 60 to 130 0.08m 150 to 200 0.13m 0.16m These are minimum requirements and the surface can be greater if desired. OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 7...
  • Page 8: Access Panel

    The servicing procedure will take longer than through an access panel. Fireplace installers are advised to consult with their clients, project architects or interior designers regarding the advantages and disadvantages of each service option. FIRE ACCESS PANEL OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 8...
  • Page 9: Recessed Installation

    7. TV CLEARANCES RECESSED INSTALLATION FLUSH INSTALLATION 305mm MIN 305mm MIN OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 9...
  • Page 10 TESTED AND APPROVED BY AGA & IAPMO-R&T FOR USE WITH NATURAL GAS (NG). Australian Standard AS5263-0:2016 - Decorative Gas Log and Other Fuel Effect Appliances Patent Pending for screen barrier glass bracket: USSN 60/040,074 OBLICA | SPECIFICATIONS AND PRODUCT GUIDE PAGE 10...