Maintenance
Note
Make no attempt to service or repair a
Thermo Scientific product under warranty
before consulting your Thermo Scientific
dealer. After the warranty period, such
consultation is still advised, especially
when the repair may be technically
sophisticated or difficult. If assistance is
needed beyond what the distributor can
provide, please call Customer Service at
800-438-4851. No merchandise should
be returned directly to the factory without
obtaining a Return Materials
Authorization (RMA) number from
Customer Service.
Warning
Disconnect plug from electrical
outlet before attempting any
maintenance or repair of this unit.
Any internal adjustments or repairs
must be performed by a qualified
service representative.
Cleaning of Units
•
Disconnect power cord from its outlet.
•
Set the temperature control to the OFF position.
•
The unit designs permit easy and rapid cleaning and
should not take more than a few minutes. Remember to
wear protective gloves to prevent frost bite, especially
when removing items from freezer units
•
Do not use abrasive scouring powders, waxes, solvents,
furniture polish, undiluted detergents or cleansers
containing petroleum products on the surfaces of units.
Interior/Exterior and Door Gaskets
A solution of mild soap and water can be used for cleaning the
interior, exterior and door gaskets with a soft, clean cloth. Rinse
with clean water and dry thoroughly before reconnecting and
turning on the unit.
Condenser
With forced-fan vented units, remove the screws that mount the
grill to the unit. Pull temperature control knobs straight out. This
will expose condenser for cleaning
21