Table of Contents
Advertisement
PAUL station
manual
2 What can be delivered for the
2.1 Overview
The minimum scope of delivery for a permanent water supply solution by the
consists of
®
PAUL
unit equipped with
OPV
(Overfill Protection Valve) which replaces the standard sieve of
This is the minimum requirement for a permanent water supply with the
as it enables the connection between the RWT (or any other water supply connection)
®
with
PAUL
and a self-closing cover which can be opened in order to fill
bucket alternatively. Here a sieve is provided identical to the standard sieve.
In addition to this minimum scope of delivery, the following items are available and recom-
mended, depending upon the local circumstances:
set 1: connecting the RWT to
set 2: connecting
set 3: outlet of the FWT
set 4: side outlet with hose
OPS
RPS
With the side outlet with hose, you can observe the water level inside
transparent. This is sufficient in most cases.
For those, however, who want/need an automated warning once the water level inside
®
PAUL
is low, we offer a
OPV-S
(Overfill Protection Valve with Sensor) which replaces the standard sieve of
®
PAUL
, including the nozzle to connect the RWT with
which can be opened in order to fill
provided identical to the standard sieve.
It is identical with the OPV but also has the water level sensor mounted.
LWS
(Low waterlevel Warning System) box: this separate box is connected to the wa-
ter level sensor mounted on the OPV-S via a 2-wire electric connection. The LWS box
can be mounted close to
gardless of polarity), e.g. in the house of the caretaker.
PAUL Station Manual 2019-05-25
PAUL
PAUL
®
PAUL
to the FWT
®
PAUL
control unit which consists of
PAUL
®
PAUL
or even far remote by simply adding more wiring (re-
®
Station
®
PAUL
®
with a bucket alternatively. Here a sieve is
®
PAUL
station
®
PAUL
®
PAUL
station,
®
PAUL
with a
®
PAUL
, as the hose is
and a self-closing cover
25.05.2019
page 3
Advertisement
Table of Contents
