PAUL station
manual
1 Principle of the
The waterbackpack
that it is essential to be able to tap large amounts of water in a short time. As the filtration
®
process in
PAUL
is steady but slow, two additional tank are necessary:
a Raw Water Tank (RWT) that stores the raw water so
a Filtered Water Tank (FWT) to store the filtered water during times where no water is
tapped
Figure 1 shows a scheme of the
Water is pumped into the RWT (as an example, in the scheme above realized with a solar
powered solution) and flows into the
flows into the FWT.
PAUL Station Manual 2019-05-25
®
PAUL
Station
®
PAUL
is the core of the
®
PAUL
Figure 1:
Scheme of the
PAUL
®
PAUL
station. The basic idea behind it is
Station arrangement.
®
PAUL
®
unit. The filtered water from the
®
PAUL
can filter continuously
OPV: w/o LWS (box+sensor)
OPV-S: incl. LWS (box+sensor)
(included in set 2)
bottom outlet
water taps
station
PAUL
page 1
Single Valve
®
unit then
25.05.2019