Set 4 Side Outlet With Hose; Figure 12: Side Outlet With Hose - WaterBackpack PAUL Manual

PAUL station manual page 15

4.4 Set 4 side outlet with hose

®
The side outlet near the bottom of PAUL (and/or optional also the bottom outlet in the bot-
® ® ®
tom of PAUL ) is used to flush the slurry that PAUL retains and stores inside PAUL . This
has to be done from time to time, depending upon the solids content of the raw water. We
®
recommend to flush out PAUL every week so it will probably not been forgotten, see chap-
ter 6.2.1.
®
In order to facilitate this, and also in order to be able to see the waterlevel inside PAUL , we
provide set 4, the side outlet with hose. Figure 12 shows how it works.
Figure 12: Side outlet with hose
Remove the black or red cap and install the brass screw with hose connector. Then mount
the hose on the hose connector and fix it with a hose clamp.
PAUL Station Manual 2019-05-25 25.05.2019