Self-Diagnosis - Black+Decker BXAC40006GB Manual

♦
When you have completed the drainage process,
turn the unit back on and ensure the 'Water' and
'Comp' indicators are no longer flashing. This
signals the process has been carried out correctly
and the unit has been drained.
Note! To stop the buzzing sound, press any button
on the unit's remote control.
Note! Always wait at least 3 minutes after switching
off the unit before turning it back on. This will help
prolong the life of the compressor.
Draining Without the Tank
♦
You can also drain the unit without needing to
empty the water tank. To do so, simply remove
the drain plug and plug cap, insert the drain tube
into the water outlet, and connect the other end of
this tube into a drain, as shown in the illustrations
below.
Note! The drain must be at or below the outlet level.
Note! Please note that when using this method of
drainage, the 'Water' indicator on the unit's control
panel will not flash.
Drain Tube
Extending the Drainage Tube
♦
The drainage tube can also be extended using
a tube of a similar diameter (18mm) and an
appropriate connector, as shown in the illustration
below.
Original Tube

Self-Diagnosis

♦
This unit is equipped with a self-diagnose feature,
which warns you of any errors or malfunctions
it finds in the course of its normal operation.
Any errors the unit finds when running its self-
diagnose will be represented by the words 'E1' or
'E2' appearing on the display panel.
♦
Should any malfunction occur, please seek out
a specialised technician or contact our customer
support team.
Cleaning and maintenance
WARNING: Before cleaning and maintenance,
switch the appliance off and remove the plug from
the socket, to prevent electric shock.
Note! Always unplug the unit from the mains before
cleaning.
Note! Clean the unit regularly to ensure optimal
performance.
Cleaning the Housing
♦
To clean the unit's housing, wipe it down with a
soft, damp cloth.
♦
Never use aggressive chemicals, gasoline,
detergents, chemically treated cloths or other
cleaning solutions to clean the unit, as this may
cause damage to its components.
Cleaning the Filter
♦
To clean the filter, tap it lightly or use a vacuum
cleaner to remove loose dust and dirt from its
surface.
♦
Once it is dust and dirt-free, rinse the filter
thoroughly under running water, at a temperature
of no more than 40 degrees centigrade.
♦
Dry the filter thoroughly before placing it back into
the unit.
Note! NEVER attempt to operate the unit without the
filters.
Extension Tube
(Original instructions) ENGLISH
13