Table of Contents
Advertisement
The LED indicators and LED display on the unit's
control panel will go out and air will stop emitting
from the vents to show the unit has been turned
off.
Speed Selection
♦
Press the Speed button on the remote control
or on the appliance's control panel to choose
between High and Low speed settings. The
corresponding indicator will light up on the unit's
body to show which speed has been selected.
Controlling the Air Flow
♦
This unit allows for manual control of the air flow
through the positioning of the inner and outer
louvers at the front of the unit.
♦
To position the outer louvers, gently hold them by
the lip and push them upwards or downwards as
required. Push the louvers upwards to open them,
or downwards to close them.
♦
To position the inner louvers, gently hold them
by the lip and push them sideways to the left or
right as required. The air flow will be re-directed
accordingly.
Temperature Selection
♦
While the unit automatically adjusts its selected
mode to reflect room temperature, temperature
outputs can also be manually controlled if
required.
♦
Press the Up and Down buttons on the remote
control or the + and – buttons on the unit's control
panel to manually adjust temperature levels. Press
the Up or + buttons to increase the temperature,
or press the Down or – buttons to decrease it.
Note! The unit's temperature will increase or
decrease by increments of 1, from 18 to 32 degrees.
Selecting Functions
♦
Press the Mode button on the remote control or
on the appliance's control panel to switch between
the Auto, Cooling, Fan and Dehumidifying modes.
To select a different function, press the button
again as many times as required until you have
reached your preferred function.
(Original instructions)
♦
Automatic Mode - Automatic mode is the unit's
default working mode. In this mode, the unit will
automatically detect ambient temperature in the
room and select the appropriate function. If the
ambient temperature is above 23 degrees, the
unit will automatically start in cooling mode; if
the temperature is 23 degrees or below, it will
automatically start in ventilation mode.
The corresponding indicators will light up to show
which mode the unit is operating in. For cooling
mode, the Auto and Cooling indicators will light up;
for ventilation mode, the Auto and Fan indicator
will light up.
Note! When the unit is in Automatic mode,
temperature levels cannot be manually controlled or
changed.
Note! When first turned on, the unit will automatically
start on Automatic mode.
♦
Cooling Mode - In cooling mode, the unit will blow
out cold air to decrease the ambient temperature.
To select cooling mode, press the 'Mode' button
repeatedly until the corresponding indicator lights
up.
♦
Fan Mode - In fan mode, the unit will blow out
natural air to cool the ambient temperature.
To select fan mode, press the 'Mode' button
repeatedly until the corresponding indicator lights
up.
Note! When the unit is in Fan mode, temperature
levels cannot be manually controlled or changed.
♦
Dehumidifying Mode - This unit is equipped with a
dehumidifying function, which removes moisture
from the air to purify it.
To select dehumidifying mode, press the 'Mode'
button repeatedly until the corresponding indicator
lights up.
Note! When the dehumidifying function is selected,
the unit will vibrate briefly as the compressor kicks
in. This is normal and not indicative of malfunction.
♦
Sleep Mode - You can set the unit to operate
overnight by pressing the Sleep button when the
unit is in operation.
In sleep mode, the unit will operate at low speed,
and its temperature will increase or decrease by
1 degree for the first two hours. The unit will then
keep a constant temperature until turned off.
ENGLISH
11
Hide quick links:
Advertisement
Table of Contents
