NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Remove the two screws (M2.5x4) that secure the left hinge to the palm-rest assembly.
2. Place the top surface of the computer on a flat and clean surface, then open and close the computer.
42
Removing the headset port
Removing the headset port
computer. After working inside your computer, follow the instructions in
22
After
www.dell.com/