Cleaning The Pop-Up Trimmer - Philips S9000 Series Manual

Cleaning the pop-up trimmer

2 Press the release button on the shaving unit and
pull the shaving head holder off the shaving unit.
3 Rinse the hair chamber and shaving head holder
under the tap.
4 Remove the shaving heads. For detailed
instructions, see 'How do I replace the shaving
heads?'.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving
guard, it may take several weeks before optimal
shaving performance is restored.
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the shaving unit.
For detailed instructions, see 'How do I replace the
shaving heads?'.
8 Insert the hinge of the shaving head holder into the
slot in the top of the shaving unit and close the
shaving unit.
Clean the trimmer after each use to prevent clogging
and damage.
Never dry the trimmer teeth with a towel or tissue, as
this may damage the trimmer teeth.
27
English