Cleaning The Trimmer Attachment; Replacing The Shaving Heads - Philips SP9871 Manual

22
English

Cleaning the trimmer attachment

Replacement

Replacing the shaving heads

11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the ring
clockwise until it clicks to indicate that the ring is
fixed.
12 Attach the shaving head holder to the bottom part of
the shaving unit ('click').
Never dry the trimmer with a towel or tissue, as this
may damage the trimming teeth.
Clean the trimmer attachment after each use.
1 Switch on the appliance with the precision trimmer
attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the
attachment air-dry completely.
Tip: For optimal performance, lubricate the teeth of the
attachment with a drop of sewing machine oil regularly.
For maximum shaving performance, we advise you to
replace the shaving heads every twelve months. Replace
damaged shaving heads immediately.
Always replace the shaving heads with original Philips
shaving heads (see 'Ordering accessories').