Using The Quick Clean Pod; Replacing The Quick Clean Pod Cartridge - Philips S9000 Series Manual

24
English
Frequency of use
Every day
6 Put the top of the Quick Clean Pod back onto the
base and turn it clockwise until you hear a click.
Do not tilt the Quick Clean Pod to prevent leakage.

Using the Quick Clean Pod

Note: If you use the shaver with shaving foam, shaving
gel or pre-shave products, thoroughly rinse the
shaving heads before you use the Quick Clean Pod
(see 'How do I clean my appliance and the
attachments?').
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
Place the shaver upside down into the Quick Clean
1
Pod. While switched on, the shaver automatically
detects that it is in the Quick Clean Pod.
2 Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately one
minute. During the cleaning program the remaining
time is displayed as a countdown clock on the
handle.
3 Let the shaver air-dry completely in the Quick
Clean Pod before storing it.

Replacing the Quick Clean Pod Cartridge

Replace the Quick Clean Pod Cartridge immediately
when the cartridge replacement icon on the Quick
Clean Pod becomes visible or follow the table below.
Cycles
About 30
When to replace the
Quick Clean Pod
Cartridge
Every month