Canon iP3000 Simplified Service Manual page 14

*1: Refurbishment completion procedures:
At end of refurbishment of normal printers, set the printer to the default shipment conditions
(with the carriage locked in the home position, and the paper lifting plate in the raised position),
following the steps below.
(1) Install the print head, and while pressing and holding the Power button, connect the AC
plug.
(2) After the LED lights in green, with the Power button still pressed, press and release the
Resume/Cancel button 2 times, and release the Power button.
Resume/Cancel button pressing
First time
Second time
(3) Open the front door and access cover.
The carriage moves to the print head
replacement position.
(4) Remove the print head.
(5) Fix the print head lock lever with tape. (The Power LED blinks in green.)
(6) Press the Paper Feed switch.
(7) Close the front door.
(8) Close the access cover.
(9) Remove the power cord.
(10) Pack the printer.
Power LED
Lights in orange.
Lights in green
(The Power LED blinks in green.)
(The Power LED blinks in green.)
(The Power LED lights in green.)
(The Power LED blinks in green, then is extinguished.)
34
Paper Feed LED
Cassette lights.
ASF lights.