Table of Contents
Advertisement
Entering Selectable Features Mode
With the unit
1.
the
button. The amber X
"beep" will sound.
Immediately after the "beep", led
2.
the sws
selectable feature. To select led
™
press the
the two
If illumination of the selected led is solid, feature is
3.
may be canceled by pressing the
will sound, confirming feature is
If the selected
4.
activated by pressing the
solid illumination will confirm the feature is
Press the p/v button to retain your new settings for selectable
5.
features. Two "beeps" will confirm that you have exited from
selectable features. Your unit will be
operation.
General Guidelines
Do not mount your unit directly behind windshield wipers or
mirrored sunscreens which block Radar and Laser signals
and substantially reduce warning range. Unlike "after market"
mirrored sun-screens, regular tinted glass does not affect
Radar reception.
Radar signals are also reflected by the "heated windshields"
known as Instaclear
on some vehicles. This type of windshield makes any dash,
visor or windshield mounted detector ineffective. (If in
doubt, check with an appropriate dealership to see if this
applies to your vehicle.)
To achieve optimum performance, regardless of which
mounting position you choose, follow these basic steps on the
following page:
Instaclear is a registered trademark of the Ford Motor Company.
ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy.
, press and hold the
button. Use the
s.
is flashing, the feature is
®
and ElectriClear
button, then press
will illuminate and a short
will show the status of
#
(
#
button to toggle between
button. Two "beeps"
.
button. A single "beep"and
and ready for
®
available as an option
®
Guard
),
, but
, but may be
.
Advertisement
Table of Contents
