Table of Contents
Advertisement
.
Slide the visor clip onto the top of the detector until it snaps
into place. Clip the detector to the edge of the sun visor nearest
the windshield.
Windshield Mounting (Not recommended for Motorcycle use)
Remove the detector's cover by pressing on the raised dots
1.
and pushing outward. Store the cover in a safe place.
.
Clean the selected windshield area, position the suction-cup
mount on the windshield, and press firmly on each suction
cup to secure it in place.
3.
Use a screw driver or a small coin to adjust the suction-cup
mount until the base plate is level.
.
Slide detector onto base plate until it snaps into place.
Note—some vehicles have a plastic coating on the inside of the
windshield designed to protect occupants in case of an accident.
Use of the windshield bracket on this type of windshield can
permanently mark the surface. Check with your dealer if you
are unsure whether your vehicle is equipped with this type of
windshield.
q
p
Advertisement
Table of Contents
