Reset To Factory Settings; Selectable Features - Beltronics VECTOR LR Operating Instructions Manual

Once engaged, weak X, K or Super Wideband Ka
signals encountered will produce no audible alerts until
the signal strength reaches a preset level. Visual alerts
are processed the instant an X, K or Super Wideband
Ka signal is detected, keeping you quietly informed.
Pressing
two beeps and the illumination of the green
confirms highway mode.

Reset to Factory Settings

You can reset your unit to factory settings for volume,
,
DRK AUDIO
press and hold the
OFF
press the
settings are reset. Your unit is now
operation.

Selectable Features

Auto-Mute, Safety Warning System
Wideband Ka
33.8 GHz, 34.36 GHz, 34.7 and GHz, 35.5 GHz, are all
features that may be selected
upon your preference.
Auto-Mute On/Off
When activated, unit will provide several X, K, Super
Wideband Ka audio alerts followed by a "clicking" tone
to keep you quietly informed for as long as the signal is
present. The clicking becomes more rapid as the
strength of the Radar signal increases. Auto-Mute
enables you to conveniently monitor extended
encounters without having to manually mute or adjust
the volume setting.
Note – because of their urgency, Laser alerts are not
affected.
9
a third time returns you to highway mode;
CTY
, and Selectable Features. With the unit
CITY
button. Two "beeps" will confirm factory
PWR
/ and the four Ka Narrow frequencies:
ON OFF
and buttons, then
AUD CTY
ON
® , X, K, Super
or
ON OFF
/
H C LED
and ready for
, depending