Reset To Factory Settings; Selectable Features - Beltronics Express 935 Owner's Manual

Reset to Factory Settings

You can reset your unit to factory settings for volume,
and Selectable Features. With the unit
CITY
button, then press
CITY
The display will briefly show "RESET" and provide two "beeps".
Your unit is now reset to its original factory settings and ready for
operation.

SELECTABLE FEATURES

Safety Warning System
Voice Messages and Radar/Laser Digital Voice prompts are
features which may be selected
your preference.
Safety Warning System
When , unit will provide an alarm and text message when
ON
signals from sws
is .
ON
-2 Guard ® Alert
VG
When activated, unit will detect signals from Interceptor
transmitters. Factory setting is
Note—engage
Interceptor
Safety Warning System
When "SWSv o i c e " is selected, unit will provide Digital Voice
announcements when sws
setting is "SWSv o i c e ". When "SWSc l i c k " is selected, Digital
Voice is replaced by "tone/clicking" only.
Radar/Laser Digital Voice prompts
When "VOICEo n " is selected, unit will provide Digital Voice
prompts followed by "beeps" when X/K/Ka and Laser signals
are detected. Factory setting is
selected unit will sound unique audio tones only.
9
AUDIO
, VG-2 Guard
®
® (sws ™ )
transmitters are detected. Factory setting
™
-2 Guard only in areas known to use the
®
VG
-2.
VG
(sws ) with Digital Voice Messages
® ™
TM
OFF
and / buttons simultaneously.
PWR VOL
Alert, sws
®
or , depending upon
ON OFF
.
OFF
transmitters are detected. Factory
. When "VOICEo FF" is
ON
,
DARK AUDIO
, press and hold
Digital
™
-2
VG
,