Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beltronics V965
Summary of Contents for Beltronics V965
- Page 1 Beltronics 5442 West Chester Road West Chester OH 45069 USA USA 800-341-2288 www.beltronics.com ©2006 Beltronics Designed and Manufactured In Canada Features, specifications and prices subject to change without notice. Owner’s Manual Model: V965...
-
Page 2: Remove Card Along Perforations
Congratulations The Bel V965 is the most advanced radar, If you’ve used a radar detector before, a laser and safety detector ever designed by review of the Quick Reference Guide on Beltronics. pages 4 and 5, and the Programming The Bel V965 includes full X, K, information on pages 12 and 13 will briefly... -
Page 3: Table Of Contents
Quick Reference Card Remove card along perforations BELTRONICS V965 Quick Reference Card Press the RVW button Press the CHG button to go from one category to change your setting to the next within a category PILOT Pilot HWY * Full word: Highway or AutoScan or City... -
Page 4: Quick Reference Guide
If you prefer, you can turn AutoMute off. Page 8 Programming V965 is ready to go, just plug it in and turn it on. But you can also easily change 6 features for your preferences. Page 12-16... -
Page 5: Installation
Installation Power Connection Mounting Location To power V965, plug the small end of the WARNING: BELTRONICS cannot anticipate power cord, (telephone-type connector) the many ways the V965 can be mounted. into the modular jack on V965’s right side, It is important that you mount V965 where... -
Page 6: Controls And Features
Controls and Features Power Voice Alerts To turn V965 on or off, press the PWR The V965 provides digital voice announce- button located on the top. When you turn ments of radar and laser bands detected. If V965 on, it goes through a sequence of Safety Radar (SWS) is turned on, a safety alerts. -
Page 7: Audible Alerts
For Laser and POP signals: Since laser and POP signals (if turned on) are a possible threat no matter how weak, the V965 alerts you to these bands at full strength. For Safety signals: V965 will alert you to these signals with a double-beep tone, and a corresponding text message. -
Page 8: How To Use Programming
Release the RVW button when V965 shows the AutoMute item. Since the factory Then press the RVW button to setting is for AutoMute to be on, V965 will review the current settings. (You can display aMute ON. either tap the button to change from item to (If you accidentally don’t release the... -
Page 9: Details Of Programming
Pilot H (Letter) In this setting, V965 will display “H” for PwrOnSTD (Standard) Highway, “C” for City, and “A” for In this setting, each time you turn on V965, AutoScan. it will display “BEL V965,” “Laser,” “Ka- band,” “K-band,” “X-band,” “Safety,”... -
Page 10: Technical Details
4,571,593 4,313,216 D314,178 D313,365 • Power cord (included) D310,167 D308,837 D296,771 D288,418 D253,752 Programmable Features V965 is also covered by one or more of the • Power-On Indication following Canadian patents: • Voice Alerts 2,330,964 1,295,715 1,295,714 1,187,602 • Power-On Sequence 1,187,586 •... - Page 11 The Signal Meter ramps source aimed in your direction. accordingly. V965 emits short alerts for a few seconds and An instant-on radar source is being used ahead then falls silent only to briefly alert and fall of you and out of your view.
- Page 12 Traffic radar, which consists of microwaves, sensors often operate on the same travels in straight lines and is easily reflected frequency as radar, your V965 will by objects such as cars, trucks, even occasionally receive non-police radar guardrails and overpasses. Radar works by signals.
-
Page 13: How Safety Radar Works
From the factory, your V965 is programmed with SWS decoding OFF. If Safety transmitters become more prevalent SWS is used in your area, your V965 will (the number of operating transmitters is display the safety messages associated with growing every day), these Safety radar the signal. -
Page 14: Troubleshooting
WorkZone One of the many Safety Radar messages (pages 22-23) Caution V965 has detected a Safety Radar Signal, but the signal isn’t yet strong enough to decode the specific safety message (page 22-23) Self Cal V965 is running a self-calibration test V965 has failed the calibration test. - Page 15 If the problem requires that you send your within 30 days (or if you notify us that you V965 to the factory for repair, we will choose not to have your V965 repaired at provide you with a Service Order Number,...
-
Page 16: Warranty And Accessories
What we will do: BELTRONICS, at our discretion, will either repair or replace your Product free of charge. What we will not do: BELTRONICS will not pay shipping charges that you incur for sending your product to us. What you must do to maintain this warranty: Show original proof of purchase from an authorized BELTRONICS dealer.
Need help?
Do you have a question about the V965 and is the answer not in the manual?
Questions and answers