Table of Contents
Advertisement
the Download button, or print a hard copy of the codes by
clicking the Print button.
5.3. Administering plug-in license codes
The Partner Portal Plug-ins page can be used to do the following tasks:
• Convert plug-in License codes to Activation codes
• Deactivate active plug-in License codes
• Reactivate deactivated plug-in License codes
• Export multiple Activation codes
• Share License codes with other Fluidmesh device users
• Accept shared License codes from other Fluidmesh device users
To do the tasks above, refer to
5.4. Using the RACER™ radio configuration interface
RACER™ is Fluidmesh's web-based configuration portal. It is the primary
interface with which to configure Fluidmesh radio devices.
You can operate FM Racer using any internet-connected computer with a
web browser.
To access the FM Racer portal, do the following steps:
1.
Log in to the Fluidmesh Partners Portal using your login
credentials.
2.
Click
this link.
For detailed instructions on how to use the FM Racer interface, refer to
the Fluidmesh Networks RACER™ User Manual.
IMPORTANT
For a detailed description of the differences between FM Racer
and the local Configurator interface, refer to
configuration using the configurator interface" (page
5.5. Viewing the technical documentation for your
Fluidmesh device
All documentation relating to your Fluidmesh device (such as product
brochures, technical data sheets, installation instructions and user
manuals) can be found in the Documentation section of the Partner Portal.
To find documentation relating to your Fluidmesh device, do the following
steps:
© 2021 Cisco and/or its affiliates. All rights reserved.
Using the Fluidmesh Partner Portal
"Plug-In management" (page
98).
"Device
36).
Page 34 of 138
Advertisement
Table of Contents
