Table of Contents
Advertisement
To convert a License code into an Activation code for a Fluidmesh device,
do the following steps:
1.
Log on to the
2.
Click the Plug-ins link.
• When you purchase a generic 16-digit License code, the
License code and corresponding plug-in will be listed on
the Plug-ins page
Figure 58. Partner Portal Plug-ins page (License code
plug-in)
• When the generic License code was purchased, you will
have received an E-mail from plugins@fluidmesh.com
containing the License code. If the License code and
corresponding plug-in are not listed on the Plug-ins page,
click the Add button in the upper left-hand corner of the
Plug-ins web page, and enter the License code using the
dialog.
3.
Enter the unit identification number (5.a.b.c) or the unit serial
number of the Fluidmesh unit in the Mesh ID - Serial Number
field.
4.
If needed, enter the name of the relevant technical project in the
Project Name field.
© 2021 Cisco and/or its affiliates. All rights reserved.
Fluidmesh Partner
Portal.
(Figure 58 (page
Software Plug-Ins
114)).
Page 114 of 138
Advertisement
Table of Contents
