Index 1. INTRODUCTION ............................3 2. GENERAL SAFETY .............................3 3. PRODUCT SPECIFICATIONS AND FUNCTIONS ....................4 3.1. D ..........................4 IMENSIONS AND EIGH 3.2. S ............................4 PECIFICATIONS 3.3. S ..........................5 YSTEM NTRODUCTION 4. BATTERY OPERATION AND COMMISSIONING ....................6 4.1. S ON .............................6 YSTEM OWER 4.2.
2. GENERAL SAFETY Sunsynk's products are designed with full consideration of safety. However, all electrical appliances can be dangerous if used inappropriately; it can cause a fire or electric shock that leads to severe injury or death.
3. SPECIFICATIONS AND FUNCTIONS 3.1. Dimensions and Weigh SSLB1 dimensions are presented in Figure 1. It is well designed for 19-inch cabinet. Power Lite Lithium Battery System SSLB1 Depth 530mm Width 440mm Height 132mm Weight 48kg Figure 1 - SSLB1 dimensions 3.2.
Greater than 10 years if used as per warranty terms 3.3. System Introduction SSLB1 Energy Storage System is consisted of 2 sets of M025100-A modules manufactured by Sunsynk. In each M025100-A, there are 8 pcs of 100 Ah LFP cell originated from CATL. The overall system also provides standard communication port, i.e.
No charge and Communication, call discharge current for 4 hours, Charging Wake up no communication goes to sleep 4.4. Buzzer function ◼ 0.25s per 1s in case of fault ◼ 0.25s per 2S during protection Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
There are 6 LED indicator, 4 green LED gives status of SoC, 1 red Alarm LED and 1 green Running Status LED (indicating charging, discharging etc.) 4.6. LED Twinkle Status Status Twinkle 1 0.25S 3.75S Twinkle 2 0.5S 0.5S Twinkle 3 0.5S 1.5S Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
4.7. SoC indicator 5. TROUBLESHOOTING The Power Lite SSLB1 battery set is designed as a lead-acid replacement energy storage solution to run with most systems. Lithium batteries have a much higher density related to lead-acid batteries, and they utilise the settings and protections built into the ancillary equipment, the BMS.
Need help?
Do you have a question about the SSLB1 and is the answer not in the manual?
Questions and answers