Introducing The Evo6000 - C-SCOPE EVO6000 User Manual

Introducing the EVO6000

Thank you for choosing the EVO6000. At C.Scope we have decades of experience of making metal
detectors. We designed EVO6000 to be a joy to use, from the way it feels when you pick it up to the
way it looks and sounds. As a C.Scope customer we are here for you with our renowned customer
service. We hope you love the EVO6000 as much as we do. Enjoy your EVO6000 and if you need any
help or advice please get in touch with us by email, online or by phone. Our details are in the
Contact section. To get detecting follow the instructions in Getting Started.
The EVO6000 has a large clear display with four round dials so you can see how the detector is set up
at a glance. The large digits in the middle of the display tell you what kind of target your EVO6000 is
detecting. The depth indicator arrows on the right indicate the depth and size of your find. The screen
has a dimmable backlight for low light situations. The EVO6000 has a beautifully simple and intuitive
user interface with just six buttons on the keypad.
The EVO6000 can be used with with wired headphones, without headphones or with wireless
®
headphones. The EVO600 supports aptX™ Low Latency Bluetooth which delivers high quality
®
wireless audio with no perceptible delay when used with aptX™ Low Latency Bluetooth capable
headphones. Use the 3.5 mm jack socket to connect wired headphones. The headphone socket and
the USB C charging port are on the back of the control unit behind a waterproof cover which must
be closed if the EVO6000 control unit is immersed in water.
Your EVO6000 will work for over 20 hours on a full charge. When you eventually do need to recharge,
use the USB C charging port to connect the supplied charger or to connect a USB battery pack.
3 / 32