Screen - C-SCOPE EVO6000 User Manual

Screen

The EVO6000 has a large clear display with four round dials so you can see how the detector is set up
at a glance. The large digits in the middle of the display tell you what kind of target your EVO6000 is
detecting. The screen has a backlight for low light situations.
The large digits in the middle of the display are the target ID. As a rough guide, targets which have a
high iron content and are low value have low target IDs and better targets have higher target IDs.
On the right of the target ID is the depth indicator. The more arrows the depth indicator the deeper
your find is.
The round dials below the target ID show the settings the EVO6000 is currently using. Iron volume
(IRON VOL) controls the volume of the low tone which plays for ferrous targets. Discrimination
volume (DISC VOL) controls the volume for the middle tones which plays for targets with target IDs
below the discrimination level (DISC). You can adjust these levels in the Tones and Target ID Ranges
menu. The sensitivity (SENS) can also be adjusted while you are detecting using the up and down
buttons .
®
The icons across the top of the screen show the status of your EVO6000. The Bluetooth and master
® ®
volume can be adjusted in the Master Volume, Backlight and Bluetooth menu. The Bluetooth
®
indicator will be on if you have headphones connected. It will flash when Bluetooth is connecting. It
will flash faster if your EVO6000 is pairing. The headphone indicator shows if you have headphones
connected and if they are wireless headphones. The master volume indicator shows more waves for
higher volume settings. The target symbol is the pinpoint indicator. It comes on when you are in
pinpoint mode. It blinks once if you are in non-motion audio discrimination mode and blinks twice
if you are in non-motion single tone mode. The battery level indicator shows the amount of charge
left in the battery. The battery level indicator scrolls up when the battery is charging.
On the smaller digits to the screen is the ground level reading. The reading indicates the level of
mineralisation of the soil. If you choose ground tracking in the menus the GTRACK indicator will be
14 / 32