Headphones; Wireless Headphones; Wired Headphones - C-SCOPE EVO6000 User Manual

Headphones

The EVO6000 can be used with with
headphones. If no headphones are connected, tones will be played through the built in loudspeaker.
The volume of the audio is controlled using the master volume control. Setting the master volume
to zero will mute all audio.

Wireless Headphones

The EVO600 supports aptX™ Low Latency Bluetooth
no perceptible delay when used with aptX™ Low Latency Bluetooth
results and support, we recommend C.Scope headphones.
Connecting and Disconnecting
To connect your wireless headphones for the first time you first need to pair them with your
EVO6000. Once your headphones have been paired and connected once they will be remembered by
your EVO6000 and will connect automatically each time your EVO6000 is turned on and whenever you
®
enable Bluetooth .
You can switch from wireless headphones back to the loudspeaker by switching off Bluetooth or by
turning off your wireless headphones. To switch off Bluetooth
Master Volume, Backlight and Bluetooth
back on and automatically reconnect with your wireless headphones.
Paring
Follow the instructions for your wireless headphones to put them into pairing mode. Normally you
make sure the headphones are turned off, then press and hold the on button on the headphones
until you hear confirmation that they are pairing. While your wireless headphones are pairing ,
choose PAIR from the Master Volume, Backlight and Bluetooth
®
Bluetooth indicator will flash slowly then quickly as pairing progresses. Pairing can take about a
minute. Once pairing completes, the name of the headphones will briefly appear on the screen and
the headphones will connect. The Bluetooth
show the headphone icon with waves and any sound will play over the wireless headphones. For help
with pairing check the Troubleshooting
Unparing
To forget a set of wireless headphones, choose PAIR from the
®
Bluetooth menu and do not carry out the pairing process on your wireless headphones. The
pairing process will time out and the EVO6000 will no longer be paired to any wireless headphones.

Wired Headphones

wired headphones, without headphones or with
®
which delivers high quality wireless audio with
®
menu. Choose BLUETOOTH again to turn Bluetooth
®
indicator will be on, the headphone indicator will
section.
24 / 32
wireless
®
capable headphones. For best
®
, choose BLUETOOTH from the
®
menu on the EVO6000. The
Master Volume, Backlight and
®